Application Setup
Chapter 3
3-6
SETUP
This menu was designed for accessing the items that will need to be changed most often. Below is an
explanation of the choices in the menu. Follow the instructions on the display for each key. The cell shaded
in gray has a multiple level menu.
F
UNCTION
K
EY
P
ARAMETER
D
ESCRIPTION
D
EFAULT
S
ETTING
K
EYPRESSES
CHANGE
SAMPLE
Change the default
sample size
10
Key in new sample size and press Enter to
accept or [F5] to escape
DELETE PART #
Delete specified part
number
Will not show until
a part number is
established
Key in part # and press [F3]. Press [F5] to enter
the setup. Press [F2] to delete part #.
KEY-IN APW
Key in an average
piece weight for
sample
0
Key in new average piece weight and press
Enter or [F5] to escape
SETUP MENUS
Continues on to the
Setup Menus
Not applicable Press [F4] to continue
The YES key is [ENTER] the NO key is [CLR].
SETUP MENUS
This is the next level of menus, which offer more advanced setup. The cells shaded in gray have multiple
level menus.
F
UNCTION
K
EY
P
ARAMETER
D
ESCRIPTION
D
EFAULT
S
ETTING
K
EYPRESSES
CAL
Calibration any of the
enabled scales
Not applicable
Key in access code and press Enter or press
[F5] to escape
DISPLAY STYLE
Chose how the
display will appear
Style 2
Press either [F1] – [F3] to chose the desired
display style or [F5] to escape
PRINT MENU
Choose what
information to print
out
Not applicable Continues on to the Print Menu selections
ADVANCE
SETUP
Continues on to the
Advanced Setup
Menu
Not applicable See page 3-9
CAL (CALIBRATION)
Refer to Chapter 5 for calibration instructions.
DISPLAY STYLE
Different display styles are offered to help customize the Model 672 to fit your needs. Choose one of the
display types and press [F5] (EXIT) to save the change and return to the main menu. By using the
[SELECT] key several modes can be viewed from the APW LOOKUP screen. See the instructions on
enabling and disabling display selections under Set Modes on page 3-7.
To Next Page
