Model 672/675 Technical Reference Manual
3-7
Style 1
This style incorporates the classic GSE 2x5 display. The large display will show the weight or quantity. The
part number is shown in small font. Press the [SELECT] key from the APW LOOKUP main screen to toggle
through the different parameter choices.
Style 2
This style incorporates the classic GSE 2x5 display in medium font and two smaller displays which will show
two other parameters. The part description can also be viewed with this style. Press the [SELECT] key from
the APW LOOKUP main screen to toggle through the different parameter choices.
Style 3
This style incorporates the classic GSE 2x5 display style in medium font along with three smaller displays,
which will show three other parameters. Press the [SELECT] key from the APW LOOKUP main screen to
toggle through the different parameter choices.
Set Modes
After choosing a display style, you have the ability to choose which screens are accessible by using the
[SELECT]. The ability exists to enable or disable each choice.
1. Press [F4] to access the SET MODES menu.
2. Use the [F1] Next Mode key to toggle through the available screens.
3. Use the [F2] Enable key to enable the screen.
4. Use the [F3] Disable key to disable the screen.
Large display
Gross
Net
Tare
APW (average piece weight)
% Accuracy
Last Sample
Quantity Total
# Accumulations
Quantity
Medium display Small display Small display
Quantity % Accuracy Sample
Quantity Gross Tare
Quantity Part # APW * K
Quantity Lot # Bin #
Quantity Quantity Total # of Accumulations
Quantity Part # APW
Gross Part# APW
Net Part# APW
Tare Part# APW
Medium Display Small Display Small Display Small display
Gross Part # Accuracy APW
Quantity Part # Accuracy APW * K
Quantity APW Accuracy Tare
Quantity Part # Lot # Bin #
Quantity Gross Tare Net
Quantity Part # APW Tare
Quantity Net Tare Gross Total
To Next Page
