GPT-9000/9000A Series User Manual
116
When the panel is being remotely controlled via
the USB, RS232 or GPIB interfaces, RMT will be
displayed on the screen.
I R G B A CW D CW
F R E Q = 0 H z 6
0
100
k V
TMR
MT I E = 0 0 3 . 2 SR
0 0 m AER F =# 0 .0
1 . 0 0 m AIH ES = 0T
0 0 . 1 S0A M P =R
2M A UN 0 0_2M A N U = * * * - 0 0
m A
When the instrument is remotely controlled all
panel keys except the STOP button are
disabled.
1. When RMT is on the display, press
the STOP button. The panel goes to
the READY status.
2. From the READY status the tester
can go into one of two states: TEST
or VIEW.
To put the tester into VIEW status,
press the MANU/AUTO key.
To put the tester in TEST status,
press the START button. This will
start the manual test/automatic
test. For more details on running a
manual test or automatic test, see
pages 64 and 90, respectively.
To put the tester back to RMT, simply issue another
remote control command.
w ww . . co m
information@itm.com1.800.561.8187
All manuals and user guides at all-guides.com
all-guides.com
To Next Page
Loading...
