GW Instek PEL-3021 - Default Settings; Factory Default Settings; Users Default Setting

PEL-3000(H) User Manual
110
Default Settings
Factory Default Settings
Description
The factory default settings can be recalled at any
time. See page 213 for a list of the factory default
settings.
Operation
1. Press
Shift
+
File
FUNC
.
2. Select Default with the Media[F1] soft-key.
3. Press Factory Default[F2].
4. Press Factory Default[F2] again to confirm.
User’s Default Setting
Description
The currently active settings can be set as the
“User’s Default” settings.
Save User’s
Default Setting
1. Press
Shift
+
File
FUNC
.
2. Select Default with the Media[F1] soft-key.
3. Press Save[F3].
 The User’s Default is saved immediately.
Recall User’s
Default Setting
1. Press
Shift
+
File
FUNC
.
2. Select Default with the Media[F1] soft-key.
3. Press Recall[F4].
4. Press Recall[F4] again to confirm.
 A User’s Default must be saved first before it
can be recalled.