PEL-3000(H) User Manual
188
Parallel Operation
The PEL-3000(H) series can be connected in parallel to increase the
total power capacity of a single unit.
The PEL-3000(H) series can operate with up to 5 units in parallel. A
single unit is designated as a master unit and any other connected
units as slaves.
Only units of the same type and rating can be used in parallel or
alternatively, the PEL-3211(H) booster pack can be used as a slave
with the PEL-3111(H).
When a master unit is used in parallel mode, to ensure stability, the
response speed will drop down to 1/2 if it was originally 1/1. You
can however, reset the response speed back (or to another value) in
the Main>Configure menu.
Parallel Capacity, PEL-3021, PEL-3041, PEL-3111
To Next Page
Loading...
