GW Instek PEL-3021 - Unreg

PEL-3000(H) User Manual
88
UnReg
Description
The UnReg error message will appear on the
display when the electronic load is operating in an
unregulated state.
Alarm
 The UnReg indicator will appear on the display
when the set load is inadequate for the source.
 To clear the UnReg indicator, increase the load
or reduce the load requirements.
Display
8.653
V
50.006
mA
0.4327
W
CV B Value 80.000
CV A Value 80.000
LOADRS232
A Value
Fine
01/Oct/2018
V
V
UnReg
UnReg indicator
Mode
CV
I Range
L87.5mA
V Range
L 80V
Response
Fast
Configure