GW Instek PEL-3021 - Create a Program

PEL-3000(H) User Manual
120
On-Time Off-Time
Step test time
Start of Step End of Step
P/F End Test Time (fixed)
P/F Time
0.04s
0.06s
Short-Time
P/F Start Test Time (fixed)
Create a Program
Note
Before creating a program, the settings for each step
must first be created and saved to internal memory
(M001-M256). See the save recall chapter for further
details, page 98.
Program Setting
Display Overview
Chain
Previous
Menu
LOADRS232
01/Oct/2017
Timing Edit for Program
On-Time:
Run:
Memory
0.1
Skip
M001
Short-Time:
P/F-Time:
Off-Time:
Off
Off
Off
STEP: 01
Program
Off
Recall
Default
Program
number
Step number in
selected program
Program
settings
PROG: 01
Program
settings
Operation
1. Press
FUNC
> Program[F1].
 Note that Program[F1] is off by default.
2. Select PROG and select a program number to
edit.
PROG
01 - 16
3. Select a STEP in the selected program.
STEP
01 - 16