GW Instek PEL-3021 - Para

OPERATION
89
Para
Description
The Para error message will appear on the display
when the PEL-3000(H) is used in parallel and if an
error is produced.
Alarm
 The Para error message indicates one of the
following possible conditions: UnReg, ROCP,
OTP.
 To clear the Para indicator, remove the cause of
the alarm.
Display
8.653
V
50.006
mA
0.4327
W
CV B Value 80.000
CV A Value 80.000
LOADRS232
A Value
Fine
01/Oct/2018
V
V
Para
Para indicator
Mode
CV
I Range
L87.5mA
V Range
L 80V
Response
Fast
Configure