GW Instek PEL-3021 - Configuration

PEL-3000(H) User Manual
190
Parallel Capacity, PEL-3211H
Model
No. of
Units
V
I
Total Sink Current
PEL-3111H+
PEL-3211H
Total Power
PEL-3111H +
PEL-3211H
PEL-3111H:
Master
x 1
800V
52.5A
N/A
N/A
PEL-3211H:
Slave
Boosters
x 1
800V
105A
157.5A
3150W
x 2
800V
210A
262.5A
5250W
x 3
800V
315A
367.5A
7350W
x 4
800V
420A
472.5A
9450W
Note
The PEL-3211H booster packs do not have a control
panel. They can only be used as slaves with a single
PEL-3111H in parallel.
Connection
Description
The J1 and J2 connectors are used for control
during parallel operation. Up to 5 units can be
used in parallel.
Note
Only the rear panel terminals can be used for parallel
operation, the front panel terminals have a lower
current rating and thus should not be used for parallel
operation.