GW Instek PSW Series - [Source:]Resistance[:Level][:Immediate] [:Amplitude]; [Source:]Voltage[:Level][:Immediate][:Amplitude]

PSW Series User Manual
46
[SOURce:]RESistance[:LEVel][:IMMediate]
[:AMPLitude]
Set
Query
Description
Sets or queries the internal resistance in ohms.
Syntax [SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude]
{<NRf>|MIN|DEF|MAX|?}
Query Syntax [SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude]
? {MIN|MAX}
Parameter/Return
<NRf>
Resistance in ohms:
0.000Ω~0.833Ω (PSW 30-36)
0.000Ω~0.417Ω (PSW 30-72)
0.000Ω~0.278Ω (PSW 30-108)
0.000Ω~5.926Ω (PSW 80-13.5)
0.000Ω~2.963Ω (PSW 80-27)
0.000Ω~1.975Ω (PSW 80-40.5)
MIN
Minimum internal resistance in ohms
MAX
Maximum internal resistance in ohms
Example SOUR:RES:LEV:IMM:AMPL 0.1
Sets the internal resistance to 100m
Ω.
[SOURce:]VOLTage[:LEVel][:IMMediate]
[:AMPLitude]
Set
Query
Description
Sets or queries the voltage level in volts.
Syntax [SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
{<NRf>|MIN|MAX}
Query Syntax [SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]?
{MIN|MAX}
Parameter/Return
<NRf>
0~105% of the rated output voltage in volts.
MIN
Minimum voltage level
MAX
Maximum voltage level
Example SOUR:VOLT:LEV:IMM:AMPL 10
Sets the voltage level to 10 volts.