GW Instek PSW Series Programming Manual

PSW Series User Manual
86
Test Setting
Test Run T-01 1
Test Load T-02 1
Test Export T-03 1
Test Remove T-04 1
Error Messages & Messages
The following error messages or messages may appear on the PSW
screen during operation.
Error Messages Description
Err 001 USB Mass Storage is not present
Err 002 No (such)file in USB mass storage
Err 003 Empty memory location
Messages Description
MSG 001 External control of output. Output off (F-94=0,
High=on)
MSG 002 External control of output. Output off (F-94=1,
Low=on)
MSG 003 No connection. (F-93=1 or F-93=2)
LCD Display Format
Use the following table to read the LCD display messages.
0 1 2 3 4 5 6 7 8 9 A B C D
E F G H I J K L M N O P Q R
S T U V W X Y Z ( ) + - ,

GW Instek PSW Series Specifications

General

Ripple & Noise (CC)	≤ 3mArms
Protections	OVP, OCP, OTP
Remote Sense	Yes
Programmable	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Voltage Resolution	1mV
Current Resolution	1mA
Current Accuracy	±0.1% + 10mA
Ripple & Noise (CV)	≤1mVrms
Load Regulation (CC)	≤0.1% + 5mA
Line Regulation (CC)	≤0.1% + 5mA
Remote Interface	USB, RS232
Display	LCD