REMOTE CONTROL
51
System Function Command
SYSTem:CONFigure:BEEPer:STATe...............................51
SYSTem:CONFigure:BLEeder:STATe .............................. 52
SYSTem:CONFigure:BTRip[:IMMediate] ......................... 52
SYSTem:CONFigure:BTRip:PROTection ........................ 52
SYSTem:CONFigure:CURRent:CONTrol ........................ 53
SYSTem:CONFigure:VOLTage:CONTrol ....................... 53
SYSTem:CONFigure:MSLave ............................................. 53
SYSTem:CONFigure:OUTPut:EXTernal:MODE ........... 54
SYSTem:CONFigure:OUTPut:PON[:STATe] ................. 54
SYSTem:COMMunicate:ENABle ....................................... 55
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess ........... 56
SYSTem:COMMunicate:LAN:IPADdress ........................ 56
SYSTem:COMMunicate:LAN:GATEway ......................... 56
SYSTem:COMMunicate:LAN:SMASk ............................... 56
SYSTem:COMMunicate:LAN:MAC .................................. 57
SYSTem:COMMunicate:LAN:DHCP ................................ 57
SYSTem:COMMunicate:LAN:DNS ................................... 57
SYSTem:COMMunicate:USB:FRONt:STATe .................. 58
SYSTem:COMMunicate:USB:REAR:STATe .................... 58
SYSTem:ERRor ..................................................................... 58
SYSTem:KLOCk ................................................................... 58
SYSTem:VERSion ................................................................. 59
SYSTem:CONFigure:BEEPer:STATe
Set
Query
Description
Sets or queries the buzzer state on/off.
Syntax
Query Syntax
SYSTem:CONFigure:BEEPer[:STATe] {OFF|ON|0|1}
SYSTem:CONFigure:BEEPer[:STATe]?
Parameter 0
<NR1> Turns the buzzer off.
OFF
Turns the buzzer off.
1
<NR1> Turns the buzzer on.
ON
Turns the buzzer on.
Return parameter <Boolean>
Returns the buzzer status.
To Next Page
Loading...
Need help?
General
