5-7
Menu item Description
<5> Modify Serial Interface Parameter Modify serial interface parameter.
<6> Exit To Main Menu Exit to the main BootROM menu.
Enter Ethernet Interface submenu
Enter <3> in BootROM menu to enter the Ethernet interface submenu. The system displays:
====================<ETHERNET SUB-MENU>======================
|Note:the operating device is CF Card |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Update Backup Application File |
| <4> Update Secure Application File |
| <5> Change Ethernet Parameter |
| <6> Exit To Main Menu |
| < Ensure The Parameter Be Modified Before Downloading! > |
=============================================================
Enter your choice(1-6):
The menu is defined as follows:
Table 5-5 Enter Ethernet interface submenu
Menu item Description
<1> Download Application Program To SDRAM
And Run
Download application program to SDRAM and
run it.
<2> Update Main Application File Upgrade the main application file.
<3> Update Backup Application File Upgrade the backup application file.
<4> Update Secure Application File Upgrade the secure application file.
<5> Change Ethernet Parameter Modify Ethernet parameters.
<6> Exit To Main Menu Exit to the main BootROM menu.
File control submenu
Enter <4> under the main BootROM menu to enter the file control submenu. Through this submenu, the
system can display application program file type in memory, modify file name and delete files. The
prompt is shown below:
========================<File CONTROL>=======================
|Note:the operating device is CF Card |
| <1> Display All File |
| <2> Set Application File type |
| <3> Set Configuration File type |
| <4> Delete File |
| <5> Exit To Main Menu |
=============================================================
Enter your choice(1-5):
To Next Page
Loading...
