Hach Ultra Low Range CL17sc User Manual

3.5 Step 3: Install the stir bar and tubing harness
Do the illustrated steps that follow.
3.6 Step 4: Install the reagent bottles
C A U T I O N
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to
the current safety data sheets (MSDS/SDS) for safety protocols.
Items to collect:
• Personal protective equipment (refer to MSDS/SDS)
• Indicator bottle
• Buffer bottle
• DPD compound bottle
1. Put on the personal protective equipment identified in the safety data sheets (MSDS/SDS).
2. Install the buffer bottle on the right side and the indicator bottle on the left side. Refer to the
illustrated steps that follow.
Note: (Optional) Use the top of the analyzer as a shelf.
English
13

Hach Ultra Low Range CL17sc Specifications

General

Measurement Method	Colorimetric DPD method
Power Requirements	100-240 VAC, 50/60 Hz
Resolution	0.01 mg/L
Accuracy	±0.03 mg/L or ±5% of reading, whichever is greater
Sample Temperature	5 to 50 °C
Cycle Time	5 minutes
Sample Flow Rate	200 mL/min
Outputs	4-20 mA
Operating Temperature	5 to 40 °C
Response Time	5 minutes