88 6LE005550A
Starting, commissioning, operation
4.3 Connecting the communication module
4.3.2
Connecting the
communication module
supply
The external 24 VDC supply is connected to the communication module at the top
of the module to the 24 V s (+ / –) terminal.
HTC320H connection terminals
Cross-section of the 24 V s (+ / –) terminal: 0.5 to 1.5 mm².
4.3.3
Connecting inputs/outputs
The input contacts of the HTC320H communication module are connected to the
INPUTS terminal at the top of the module.
The output contacts of the HTC320H communication module are connected to the
OUTPUTS terminal at the bottom of the module.
HTC320H inputs and outputs
Cross-section of terminals: 0.5 to 1.5 mm².
Note
The 2 outputs can be used to control the motorised control accessory. An ON/OFF
remote control can therefore be created via Modbus communication.
To Next Page
Loading...
