hager h3+ - PTA and OAC Contact Test Via HTP610 H

1116LE005550A
Starting, commissioning, operation
4.7 Commissioning via the HTP610H configuration tool
4.7.4
PTA and OAC contact test
via HTP610H
The HTP610H configuration tool is used to test the PTA output contact on the LSI,
LSIG and Energy circuit breakers. It is also used to test the OAC output contact on
the Energy circuit breaker.
The test involves forcing the closure of the PTA contact or OAC contact therefore
making it possible to check the status of the oset circuit wiring on the PTA or OAC
output contact.
The contacts test is performed from the Activation of input/output contacts
sub-menu.
HTP610H tool contacts activation menu