hager h3+ - Starting the Energy Trip Unit for the First Time

78 6LE005550A
Starting, commissioning, operation
4.2 Starting and configuring the circuit breaker
4.2.2
Starting the Energy trip unit
for the first time
At first start-up, before being able to access the various menus, the embedded
display will ask the user to set the orientation, brightness and Standby mode.
These settings can be confirmed using the joystick on the left-hand side of the
display.
Once the correct setting has been selected, press the joystick to confirm the setting
and move on to the next screen.
Action Note/Illustration
1
Orientation of the display
63 160
125
100
A
B
A Push the joystick
upwards or downwards
to select the orientation
of the display.
B Press the joystick to
confirm the choice
2
Setting the screen
brightness
63 160
125
100
A
B
A Push the joystick
upwards or downwards
to select the brightness.
B Press the joystick to
confirm the choice
3
Activating/deactivating
Standby mode
63 160
125
100
A
B
A Push the joystick
upwards or downwards
to activate/deactivate
Standby mode.
B Press the joystick to
confirm the choice
4
Navigation through the
main menus
63 160
125
100
After these three settings are confirmed, the Main menu is displayed.