hager h3+ - Displaying Operating Data on Agardio.manager

1156LE005550A
Starting, commissioning, operation
4.8 Operation
4.8.3
Displaying operating data
on agardio.manager
See agardio.manager user manual
- Trip unit temperature
- Protection settings and other trip unit settings
- Instantaneous and measured values (max, min, avg…)
- Test in progress
- Values tested
- Alarm settings
- Alarm logs
- Events log (changing protection settings)
- Trip unit identification information
- AX: Status of the contact and number of opening/closing cycles
- AL: Status of the contact and number of electromechanical fault trips
- ZSI: Status of the contact(s)
- Trip unit status
- Display settings
For more information about using the configuration tool, please refer to the
HTP610H h3+ configuration tool user manual.