Preface
Thank you for selecting the MONITOUCH V606e.
For correct set-up of the V606e, you are requested to read through this manual to understand more about the
product.
For more information about the V606e, refer to the following related manuals.
For further details about PLCs (programmable logic controllers), see the manual attached to each PLC.
Manual Name Contents Reference No.
Reference Manual (Operation) The V-SFT operating procedure is described. 1043NE
Reference Manual (Function) The functions and instructions of the V7/V6 series are
explained.
1044NE
PLC Connection Manual Connections with various PLCs and universal serial
communications are explained.
2200NE
Temperature Control Network The temperature control network function is
explained.
1033NE
Connection with AB Control Logix The connection, communication parameters and tag
setting for AB Control Logix are explained.
1041NE
M-CARD SFT Operation Manual The operating procedure of the memory card editor is
described.
1023NE
V-SFT Additional Specifications Additional specifications for the Reference Manual are
explained.
5044NE
Notes:
1. This manual may not, in whole or in part, be printed or reproduced without the prior written consent of
Hakko Electronics Co., Ltd.
2. The information in this manual is subject to change without prior notice.
3. Windows and Excel are registered trademarks of Microsoft Corporation in the United States and other
countries.
4. All other company names or product names are trademarks or registered trademarks of their
respective holders.
5. This manual is intended to give accurate information about MONITOUCH hardware. If you have any
questions, please contact your local distributor.
To Next Page
Loading...
