Hamlet HNW300APN2 User Manual

Wireless AP Router HNW300APN2
User Manual 110
Option
Description
WAN
Access
Type
Static IP
Choose this option if you are a leased line user with a fixed IP
address.
DHCP Client
Choose this option if you are connected to the Internet
through a Cable modem line.
PPPoE
Choose this option if you are connected to the Internet
through a DSL line
PPTP
Choose this option if you are connected to the PPTP Server
L2TP
Choose this option if you are connected to the L2TP Server
Host Name
The name of the DHCP host
IP Address
Check with your ISP provider
Subnet Mask
Check with your ISP provider
Default Gateway
Check with your ISP provider
User Name
User name for PPPoE registration recognized by the Internet
service provider
Password
Password for PPPoE registration recognized by the Internet
service provider
Service Name
Service Name for PPPoE registration recognized by the
Internet service provider
Connection
Type
Continuous
The connection is always on
Connect on
Demand
Enter the minutes after which the session must be
disconnected, if no activity takes place
Manual
Manually connect
Idle Time
Enter the minutes after which the session must be
disconnected
WAN Physical
Dynamic IP or Static IP for PPP Connection
MTU Size
Specify the network MTU rate
Attain DNS Automatically
Obtain DNS server address automatically
DNS 1 (Primary DNS Server)
Check with your ISP provider
DNS 2 (Secondary DNS Server)
Check with your ISP provider
DNS 3 (Third DNS Server)
Check with your ISP provider

Hamlet HNW300APN2 Specifications

General

Brand	Hamlet
Model	HNW300APN2
Category	Wireless Router
Language	English