Wireless AP Router HNW300APN2
User Manual 113
12.2 Configuring DHCP Client connection
Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get WAN IP Address automatically). If you are
connected to the Internet through a Cable modem line, then a dynamic IP will be assigned.
If your ISP wants you to connect to the Internet using DHCP Client, follow the instructions below.
1. From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select DHCP Client setting.
3. Click Apply Changes.
4. Change setting successfully! Click on Reboot Now button to confirm.
To Next Page
Loading...
Need help?
General
