Hamlet HNW300APN2 User Manual

Wireless AP Router HNW300APN2
User Manual 118
13. Port Filtering
Entries in Current Filter Table are used to restrict certain ports and types of data packets from your local
network to Internet through the Gateway. Use of such filters can be helpful in securing or restricting your local
network.
1. From the left-hand Firewall -> Port Filtering menu. The following page is displayed:
Option
Description
Enable Port
Filtering
Enable/Disable the WAN packet filter.
Default setting is Disable.
Port Range
Enter the port range to be filtered for both Outbound and Inbound packet
Protocol
Select the Protocol to be filtered for both Outbound and Inbound packet
Both: To filter both TCP and UDP protocol
TCP: To filter only TCP protocol
UDP: filter only UDP protocol
Comment
Fill in the note for manager what the purpose of certain port filtering rule
Current Filter
Table
The Port Filters that was created is listed here
Note: You must ensure that the single port or range specified does not overlap with a port or range for an
existing common or custom application.

Hamlet HNW300APN2 Specifications

General

Brand	Hamlet
Model	HNW300APN2
Category	Wireless Router
Language	English