Wireless AP Router HNW300APN2
User Manual 154
30. Password
You can restrict access to your device’s web pages using password protection. With password protection
enabled, users must enter a username and password before gaining access to the web pages.
By default, password protection is enabled on your device, and the username and password set are as
follows:
Username: admin
Password: hamlet
30.1 Setting your username and password
Note: Non-authorized users may try to access your system by guessing your username and password.
We recommend that you change the default username and password to your own unique settings
To change the default password:
1. From the left-hand Management menu, click on Password. The following page is displayed:
Figure 5: Currently Defined Administration Password: Setup page
2. This page displays the current username and password settings. Change your own unique password in
the relevant boxes. They can be any combination of letters or numbers with a maximum of 30
characters. The default setting uses admin for the username and hamlet for password.
3. If you are happy with these settings, click Apply. You will see following page that the new user has been
displayed on the Currently Defined Users. You need to login to the web pages using your new username
and new password.
To Next Page
Loading...
Need help?
General
