Hamlet HNW300APN2 User Manual

Wireless AP Router HNW300APN2
User Manual 60
STBC
Disable or Enable STBC
20/40MHz
Coexist
Disable or Enable 20/40MHz Coexist
RF Output Power
TX Power measurement.
10.3 Security
This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could
prevent any unauthorized access to your wireless network. To access the Wireless Network Security page:
From the left-hand Wireless menu, click on Security. The following page is displayed:
Field
Description
Select SSID
Select the SSID
Encryption
Configure the Encryption to Disable, WEP, WPA , WPA2 or WPA-Mixed
Use 802.1x
Authentication
Use 802.1x Authentication by WEP 64bits or WEP 128bits
Authentication
Configure the Authentication Mode to Open System, Shared Key or Auto
Key Length
Select the Key Length 64-bit or 128-bit
Key Format
Select the Key Format ASCII (5 characters), Hex (10 characters), ASCII (13
characters) or Hex (26 characters)
Encryption Key
Enter the Encryption Key
WPA
Authentication
Mode
Configure the WPA Authentication Mode to Enterprise (RADIUS) or Personal
(Pre-Shared Key)
WPA Cipher Suite
Configure the WPA Cipher Suite to TKIP and/or AES
WPA2 Cipher
Configure the WPA2 Cipher Suite to TKIP and/or AES

Hamlet HNW300APN2 Specifications

General

Brand	Hamlet
Model	HNW300APN2
Category	Wireless Router
Language	English