Hamlet HNW300APN2 User Manual

Wireless AP Router HNW300APN2
User Manual 69
10.5 WDS settings
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To
do this, you must set these APs in the same channel and set MAC address of other APs which you want to
communicate with in the table and then enable the WDS. To access the Wireless Network WDS settings
page:
From the left-hand Wireless menu, click on WDS settings. The following page is displayed:

Hamlet HNW300APN2 Specifications

General

Brand	Hamlet
Model	HNW300APN2
Category	Wireless Router
Language	English