Wireless AP Router HNW300APN2
User Manual 115
12.4 Configuring PPTP connection
If your ISP/Network Administrator wants you to connect to the Internet using PPTP, follow the instructions
below.
1. From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select PPTP setting.
3. Enter IP Address/Subnet Mask/Server IP Address/User Name/Password provided by your ISP.
Type them in the relevant boxes.
4. Click Apply Changes
5. Change setting successfully! Click on Reboot Now button to confirm.
To Next Page
Loading...
Need help?
General
