Wireless AP Router HNW300APN2
User Manual 117
12.6 Clone MAC Address
Some particularly ISPs do not want you to have a home network and have a DSL/Cable modem that allows
only 1 MAC to talk on the internet. If you change network cards, you have to call them up to change the MAC.
The Wireless Gateway can it’s MAC to computer's one that was originally set up for such an ISP.
This page allows you to enable or disable Clone MAC Address option.
1. From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
2. Enter the MAC for example 0123456789ab that you want to be instead of in the Clone MAC Address
field.
3. If you enter 12 digits of 0 in the Clone MAC Address field, it’ll disable Clone MAC Address function.
4. Click Apply Changes.
5. Change setting successfully! Click on Reboot Now button to confirm.
To Next Page
Loading...
Need help?
General
