Hamlet HNW300APN2 User Manual

Wireless AP Router HNW300APN2
User Manual 152
29.3 Resetting to Defaults
If you do make changes to the default configuration but then wish to revert back to the original factory
configuration, you can do so by resetting the device to factory defaults.
Note: If you reset your device to factory defaults, all previous configuration changes that you have made are
overwritten by the factory default configuration
Software Reset:
1. From the left-hand Management menu, click on Reset factory default. The following page is displayed:
2. Click on Reset Settings to Default.
3. This page reminds you that resetting to factory defaults cannot be undone – any changes that you have
made to the basic settings will be replaced. If you are happy with this, click OK. Or click Cancel to cancel
it.
4. Reload setting successfully! Please wait for a moment while rebooting ...

Hamlet HNW300APN2 Specifications

General

Brand	Hamlet
Model	HNW300APN2
Category	Wireless Router
Language	English