Wireless AP Router HNW300APN2
User Manual 124
14.3 IP filtering for both TCP and UDP with specified IP
Please follow example below to deny the both TCP and UDP protocol for specified IP.
1. From the left-hand Firewall -> IP Filtering menu. The following page is displayed:
2. Check the option Enable IP Filtering to enable the IP Filtering.
3. Enter the IP Address that you want to be denied in Loal IP Address field.
4. From the Protocol drop-down list, select Both setting.
5. Enter any comment in Comment field.
6. Click Apply Changes.
7. Now the IP Filter that you created has been added and listed in the Current Filter Table.
8. Now the TCP and UDP protocol for both Outbound and Inbound packet has been denied.
To Next Page
Loading...