Wireless AP Router HNW300APN2
User Manual 32
8.2 WAN Interface Setup
This page is used to configure the parameters for Internet network which connects to the WAN port of your
Wi-Fi Router. Here you may change the access method to static IP, DHCP, or PPPoE by click the item value
of WAN Access type.
To change the WAN Access Type:
1. From the WAN Access Type drop-down list, select Static IP, DHCP Client, PPPoE, PPTP, or L2TP
setting determined by your Network Administrator or ISP.
2. Click Next>>.
To Next Page
Loading...
Need help?
General
