Wireless AP Router HNW300APN2
User Manual 59
10.2 Advanced Settings
These settings are only for more technically advanced users who have a sufficient knowledge about wireless
LAN. These settings should not be changed unless you know what effect the changes will have on your
Wi-Fi Router. To access the Wireless Network Advanced Settings page:
From the left-hand Wireless menu, click on Advanced Settings. The following page is displayed:
When transmitting a packet over a network medium, sometimes the packet is
broken into several segments, if the size of packet exceeds that allowed by the
network medium.
The Fragmentation Threshold defines the number of bytes used for the
fragmentation boundary for directed messages.
RTS stands for “Request to Send”. This parameter controls what size data
packet the low level RF protocol issues to an RTS packet. The default is 2347.
Choosing beacon period for improved response time for wireless http clients.
Specify the Preamble type is short preamble or long preamble
A protection mechanism prevents collisions among 802.11g nodes.
Disable or Enable Aggregation
Disable or Enable Short GI
Disable or Enable WLAN Partition
To Next Page
Loading...
Need help?
General
