Wireless AP Router HNW300APN2
User Manual 112
12.1 Configuring Static IP connection
If you are a leased line user with a fixed IP address, enter in the IP address, subnet mask, gateway address,
and DNS (domain name server) address(es) provided to you by your ISP.
If your ISP wants you to connect to the Internet using Static IP, follow the instructions below.
1. From the left-hand Network Settings -> WAN Interface menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select Static IP setting.
3. Enter WAN IP Address, WAN Subnet Mask, Default Gateway and DNS which was given by Telecom or
by your Internet Service Provider (ISP).
4. Click Apply Changes.
5. Change setting successfully! Click on Reboot Now button to confirm.
To Next Page
Loading...
Need help?
General
