Wireless AP Router HNW300APN2
User Manual 65
WPA/WPA2/WPA2 Mixed + Enterprise (RADIUS)
Wi-Fi Protected Access (WPA and WPA2) is a class of systems to secure wireless (Wi-Fi) computer
networks. WPA is designed to work with all wireless network interface cards, but not necessarily with first
generation Wi-Fi AP Routers. WPA2 implements the full standard, but will not work with some older network
cards. Both provide good security, with two significant issues:
Either WPA or WPA2 must be enabled and chosen in preference to WEP. WEP is usually presented as
the first security choice in most installation instructions.
In the "Personal" mode, the most likely choice for homes and small offices, a pass phrase is required
that, for full security, must be longer than the typical 6 to 8 character passwords users are taught to
employ.
1. From the Encryption drop-down list, select WPA, WPA2 or WPA2 Mixed setting.
2. Click on the ratio of Enterprise (RADIUS).
3. Check the option of TKIP and/or AES in WPA Cipher Suite if your Encryption is WPA:
4. Check the option of TKIP and/or AES in WPA2 Cipher Suite if your Encryption is WPA2:
5. Check the option of TKIP and/or AES in WPA/WPA2 Cipher Suite if your Encryption is WPA2 Mixed:
6. Enter the Port, IP Address and Password of RADIUS Server:
7. Change setting successfully! Click on Reboot Now button to confirm.
To Next Page
Loading...
Need help?
General
