Wireless AP Router HNW300APN2
User Manual 67
Allow Listed
If you choose 'Allowed Listed', only those clients whose wireless MAC addresses are in the access control
list will be able to connect to your Wi-Fi Router.
1. From the Wireless Access Control Mode drop-down list, select Allowed Listed setting.
2. Enter the MAC Address.
3. Enter the Comment.
4. Click Apply Changes button.
5. Change setting successfully! Click on Reboot Now button to confirm.
6. The MAC Address that you created has been added in the Current Access Control List.
To Next Page
Loading...
Need help?
General
