Wireless AP Router HNW300APN2
User Manual 79
Configure Wireless ISP + Wireless client + Site Survey
1. From the left-hand Operation Mode menu, click on Wireless ISP Settings.
2. Click Apply Changes button.
3. Change setting successfully.
4. From the left-hand Wireless menu, click on Basic Settings.
5. From the Mode drop-down list, select Client.
6. Enter SSID of the AP that you want to connect to for example 11n_AP_Router. If you don’t know what
the SSID of the AP that you want to connect to, please skip this step.
To Next Page
Loading...