Wireless AP Router HNW300APN2
User Manual 86
AP as Proxy
At this state, AP is transparent to users. If users want to configure a station or any device that is capable of
being an enrollee, they have to enter device’s PIN into an external registrar and choose an appropriate
wireless profile. After the PIN is entered, the external registrar will inform AP this event. AP then conveys the
encrypted wireless profile between the device and the external registrar. Finally, the device will use the
wireless profile and associate with AP. However, the device may connect to other APs if the wireless profile
does not belong to the proxy AP. Users must carefully choose the wireless profile or create a wireless profile
on an external registrar.
Infrastructure-Client mode
In Infrastructure-Client mode, Wireless Gateway only supports enrollee’s role. If users click “Start PIN”, click
“Start PBC”, or press the physical button on Wireless Gateway, it will start to seek WPS AP. Once users
apply the same method on registrar side, Wireless Gateway will receive the wireless profile upon
successfully doing the registration protocol. Then Wireless Gateway will associate with an AP.
Instructions of AP’s and Client’s operations
At this state, AP is transparent to users. If users want to configure a station or any device that is capable of
being an enrollee, they have to enter device’s PIN into an external registrar and choose an appropriate
wireless profile. After the PIN is entered, the external registrar will inform AP this event. AP then conveys the
encrypted wireless profile between the device and the external registrar. Finally, the device will use the
wireless profile and associate with AP. However, the device may connect to other APs if the wireless profile
does not belong to the proxy AP. Users must carefully choose the wireless profile or create a wireless profile
on an external registrar.
To Next Page
Loading...
Need help?
General
