3. Computer configuration
Windows8 and Windows10 are not supported
4.Installation instructions
4.1 Check and acceptance
Verify that all electronic units and mechanism are in normal state as soon as the
printer is placed properly.
Disassemble all the fixtures of the printer.
Verify that all the accessories listed are included and sign the bill.
See Appendix 4. Tools and properties for all information
4.2 Installation of the computer attachments
Connect all I/O devices of the computer
Install the PCIE card into the computer case
Connect the optical fibers, serial data cables of each corresponding circuit
4.3 Installation of the UV lamp assembly
Take the lamp assembly out of the box carefully
To Next Page
Loading...