Troubleshooting
1. Buzz indications and troubleshooting
There are six kinds of buzz alert programmed in the printer.
Below is the list of indications and troubleshooting.
Main air pumps stop working and the backup air pumps activated.
When hearing the single-buzz alert
Click the “Reset” in the ink line options.
If this does not work, check as following:
1. Check if the main air pump is normal or not.
2. Verify that the connection of the power cables of the main air
pump and check its input voltage of DC 24V.
Pressure exceed the standard protection value
Click “Reset” in the software.
To Next Page
Loading...