2. Precautions of operations
Never use the printer in a non-ventilated or stuffy workplace, or it may lead to toxic hazards to
operators. A ventilator is always a necessity.
The printer is a precision equipment and should always avoid strong impact or shake in any process
of loading, installation and operation, or it may result in equipment damage.
Do not use the machine in the explosive atmosphere.
Avoid setting foot or heavy items placed on the printer or it may result in equipment damage.
Verify that there is no individual or item within the printing area.
See 2. Working environment
Any unauthorized alteration is strictly prohibited，or it might cause parts malfunction or damage to
the printer.
Any disassemble or replacement of the parts and cables is strictly prohibited in the state of
power-on.
Please supply the printer with rated voltage and frequency, improper power input may cause
functional abnormality or damage to the printer.
Avoid any liquid spilled on the electronic parts or it may result in parts malfunctions.
Verify that the printer is properly ground wired or it might cause some electric shock risks.
See
4.5 Power input requirement
Avoid continuous eye-contact with the ultra-violets of the lamp.
Wear an anti-UV goggles when the printer is working to protect the operator from accidental direct
eye-contact with the UV light.
Any disassemble or replacement of the parts and cables is strictly prohibited in the state of
power-on.
Avoid any body contact with the locomotion parts in the process of printer working, or it may lead to
equipment breakdown or personal injury.
The operator must be well-properly trained and should operate the machine under the instructions,
or it may easily cause equipment damage or personal injury.
To Next Page
Loading...