Printer Maintenance
1. Periodic maintenance for printer parts
With a view to keep the printer in good working conditions, operators should do the
maintenance job periodically according to the following instructions.
Daily routine maintenance
Clean the quartz glass of the UV lamp assembly
Clean the bottom of the printhead tray
Check the negative pressure system
Weekly routine maintenance
Clean the towline and its internal cables
Clean the fans, electronic parts
Clean the waste ink collecting tray
Do the calibration and alignment.
Monthly routine maintenance
Lubricate the rolling and moving mechanical parts
Check the joints of ink lines and air lines
Quarterly routine maintenance
Reset the pressure indicator
Replace the capsule filter
Ink pump and optical fiber
Yearly routine maintenance
Replace the quartz glass of the UV lamp assembly
Replace the disk filter and the tubes within the towline
* The following maintenance instructions with a star mark “*” is provided
for skilled person.
To Next Page
Loading...