Counter
EN
Copyright © Qingdao Hantek Electronics Co., LTD HDG3000B User manual
67
11 Counter
The generator provides a counter which can measure various parameters (such as
frequency, period, duty cycle, positive pulse width and negative pulse width) of external
input signal.
Press [Utility] > Counter softkey on the front panel to enable counter function. Input the
singal to the Counter connector on the rear panel measure.
Press Exit softkey or any other key to exit the counter.
Press Gate Time softkey and use the direction keys and the knob to modify the current
value.
The default value is 1s and the settable range is 10ms to 16s.
Figure 11.1 Counter
To Next Page
Loading...
Need help?
General
