Programmable Temperature & Humidity Controller
70
- It is the screen in which you can set the relay and
delay time about the ON/OFF signal of temperature (6) and humidity (2)
- The set ON/OFF signal, if the condition occurs, if after the setting time it turns ON,
it operates just during the first ON
▶ ON/OFF signal
Parameter Setting range Default
Temperature ON/OFF signal Up to 0 ~ 32 0
Humidity ON/OFF signal Up to 0 ~ 32 0
- Screen to set relays for DI signals.
- If a DI signal is transmitted, defined relay is ON.
▶ DI signal
Parameter Setting range Default
DI signal 1 ~ 32 Up to 0 ~ 32 0
Fig. 110) DO – ON/OFF
Fig. 111) DO – DI signal
هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ
To Next Page
Loading...
Need help?
General
