4 - Sprayer setup
4.7
Connect plug for rear lights to the tractor’s 7-pin socket, and check function of rear lights, stop lights and direction indi-
cators on both sides before driving.
The wiring is in accordance with ISO 1724. See section in “Technical specifications”.
Road safety kit
Find a suitable place in the tractor’s cabin. Best recommended
placement is to the right of the driver seat and in combination with
the Hydraulics control unit. It should be secured from movement.
Installation of control box - EVC control unit
ATTENTION! Tractor driver’s seat is the intended working
place during operation.
To Next Page
Loading...
