To Next PageTo Next Page
Need help?Do you have a question about the HAWEKA AXIS4000 and is the answer not in the manual?
General| Brand | HAWEKA |
|---|---|
| Model | AXIS4000 |
| Category | Digital Camera |
| Language | English |
Operator responsibilities for system safety and proper operation.
Details the intended use of the AXIS4000 system for suspension measurements.
Provides technical specifications for measurement ranges, accuracy, wireless module, and camera.
Step-by-step guide for installing the AXIS4000 software on a Windows PC.
Instructions on how to start and perform initial settings for the AXIS4000 program.
Details the various sections and options available within the AXIS4000 program settings.
Entering vehicle details and selecting types for accurate measurement.
Procedure for measuring the actual camber value and comparing it to nominal values.
Process for measuring total and single toe values for vehicle axles.
Steps for measuring rear axle camber using the system.
Measuring and adjusting toe and inclination for rear axles.
Steps for adding new vehicle data and nominal values to the system.
Instructions for assembling and aligning reflector stands for trailer measurements.
Lists common faults, their possible causes, and recommended correction steps.
