HAWEKA AXIS4000 - Adjusting the Steering Gear

AXIS4000 WHEEL ALIGNMENT SYSTEM
HAWEKA Wheel Alignment –AXIS4000
32
Front axle measurement
9.5.1 Adjusting the steering gear
If required, the steering gear middle position can be
adjusted using the adjust button.
• The settings display appears when the adjust button
for the steering gear is selected.
(Fig. 46)
• Check the steering middle position on the steering
gear.
(Fig. 47)
• Carry out adjustments on the push-rod until the de-
sired value is shown on the display.
During adjustments, the current value is display con-
tinuously both analogue and digital for setting the
NOMINAL value.
• After adjustments are complete, settings are con-
cluded with the Continue button. The program
changes back to the overview screen for the select-
ed axle. The newly set value appears under the "Af-
ter" column.
(Fig. 48)
(Fig. 46)
(Fig. 47)
(Fig. 48)