HAWEKA AXIS4000 - The AXIS4000 Program; Setting Up the Software

AXIS4000 WHEEL ALIGNMENT SYSTEM
HAWEKA Wheel Alignment –AXIS4000
20
7 The AXIS4000 program
We have taken great care to ensure that every level of the entire program is quick to operate and
easy to understand in terms of both its layout and use.
You will soon be able to determine the geometry of a vehicle using this program.
You will be easily guided through the individual program points in just a few work steps with the
support of help texts and graphic images. You will always have enough information to feel confident
with the program.
However, before you start the first vehicle measurement, you must carry out program settings for the
most important parameters for individual use.
7.1 Setting up the software
• Start the program.
Under Windows select: START –ALL PROGRAMS – HAWEKA – AXIS4000 and click on the pro-
gram entry AXIS4000.
After the program has started, select the "Settings" option for the first basic setting.
(Fig. 8)
(Fig. 8)