HBM GEN3i - Page 6

4.2.2 Remove/replace the battery from the PC section 65
4.3 Recharging 68
4.4 Disposal 69
5 Mains Power 70
5.1 Power and frequency requirements 70
5.2 Connecting power 71
5.3 Fuse requirements and protection 73
5.4 Fuse replacement 74
6 Introduction 76
6.1 Introducing GEN3i 76
6.2 Mainframe overview 78
6.2.1 Mainframe feature comparison 79
6.3 Hardware 81
6.3.1 PCI-e/CPCI Backplane 81
6.3.2 Input cards 82
6.3.3 Master/Slave support 82
6.3.4 Thermal protection 82
6.4 Acquisition 84
6.4.1 StatStream® 84
6.5 Signal conditioning 86
6.6 Data storage 87
6.7 PC Section 88
6.8 Perception Software 89
6.8.1 Windows logon password and remote desktop access 91
6.9 Perception language settings 92
7 Setting up the GEN3i 95
7.1 PC connections 95
7.1.1 USB 3.0 and USB 2.0 ports 96
7.1.2 DVI-I Graphics and display ports 96
7.1.3 Sound, microphone, speakers 97
7.2 Removing and installing input cards 98
7.2.1 Removing cards 98
7.2.2 Installing cards 99
7.3 Handle 101
7.3.1 Turning the handle 102
7.4 Feet 105
7.4.1 To turn the feet out: 105
GEN3i
6 I3763-3.1 en HBM: public