HBM MP85 - Installing the PME Assistant Software; System Requirements

18
PME-MP85
A0897−3.4 enHBM
2.3 Installing the PME Assistant software
2.3.1 System requirements
To operate the PME Assistant software you need a PC with the following
prerequisites:
− min. processor requirement, Intel Pentium 400 MHz or equivalent
− Windows 95 or higher, Windows NT Version 4.0 or later, Service Pack 3,
Windows 2000
− Internet Explorer 5.0 or higher
− RAM
− 32 MByte for Windows 95/98
− 64 MByte for Windows NT and Windows Millennium
− 128 MByte for Windows 2000 or later
− Graphics card with min. resolution 800 x 600 pixels
− min. 10 MBytes memory available on the hard disk
− Microsoft or 100 % compatible mouse
− configured default printer
− LPT or USB interface
The following fonts must be installed:
− Arial (TT)
− Courier
− MS Sans Serif
− Times New Roman (TT)
− Wingdings