9
PME-MP85
A0897−3.4 en HBM
The PME Assistant provides a simple user interface under MS-Windows for
parameterizing the modules.
The PME Assistant is the sole means of parameterizing and setting up
the MP85/MP85DP module (described in the Online Help).
To do this you need an LPT → CAN or USB → CAN interface converter, that
has to be ordered separately (1−PMESETUP; 1−PMESETUP-USB).
The software allows you to set all the device parameters apart from the one
for the CAN-BUS interface used for setup.
The software also allows you to set up the other devices of the PME family.
1.3 Valuable information about PME MP85 documentation
MP85 documentation comprises
• this Operating Manual,
which describes mainly the configuration of the hardware (transducer,
device and PC with the software).
• the Online Help of the PME Assistant
which describes how to use the software to set up the device
• a separate Operating Manual for the MP85DP with a CAN object index,
CAN interface description and Profibus communication
To Next Page
Loading...
