8
Spider8
Working safely
Error messages should only be acknowledged if the cause of the
error is removed and no further danger exists.
Power pack
The mains plug must be plugged into a gropunding outlet only
(protection class I). The power supply pack complies with protection
class I.
Do not open the power pack!
Never pull the mains plug from the socket by the mains lead. Do not
operate the device if the mains lead is damaged.
Spider8
If an amplifier module is removed, the plug-in unit must be closed off
with a blank plate.
The device complies with the safety requirements of DIN EN 60364;
protection class III.
Ensure that with all devices connected to the Spider8 (e.g. PC,
transducers, etc.) the mains voltage is separated safely from
extra-low voltages (double insulation).
In order to ensure adequate immunity from interference, use only
Greenline shielded ducting (see HBM offprint ”Greenline shielding
design, EMC-compliant measuring cable; G36.35.0)
To Next Page
Loading...
